Angel

This tut is written for those with a basic knowledge of psp. I use psp 10.

Supplies needed:
Masks of choice. I used WSL_Mask185 from weescotslass.

Tube of choice. I used the artwork of Gail Kimbro which I purchased here: MPT

Scrap kit of choice. I used Harmony (Red and Ice) from Bea Creations.
----------------------

Let's get started :)
1. Gather your supplies and open your psp. Open a new file size 600 x 600 pixels. Flood fill with white. Take paper of choice (I used paper 11 from Red kit), paste as a new layer.

2. Create new mask layer, make sure 'Invert mask data' is not checked. Merge layer group.

3. Take deco04 from Ice kit and paste above first mask layer.

4. Paste frame01 from Ice kit above the deco layer. Using your magic wand tool select inside frame. Go to Selections - Modify - Expand - 4.

5. Paste another paper above deco layer and below frame. (I used paper 17 from Ice kit) Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D).

6. Paste tube above frame, resize to your liking and give grop shadow. Depending on your tube you may which to crop it to fit within the frame.

7. Paste glitter01 from Ice kit, above tube layer. Duplicate layer and mirror.

8. Paste bast_bc ribbon from red kit above frame. Resize to 60% or your liking. Position toward the left side of frame, give drop shadow.

9. Paste flower01 from Red kit above frame. Resize to 40%, position to upper right corner of frame and give drop shadow.

10. Paste bow01 from Ice kit above frame. Resize to your liking and position to the lower right side of frame. Give drop shadow.

11. Paste butterfly01 from Ice kit as new layer above the others. Resize to your liking and position to the upper left side of tag. Give drop shadow.

12. Add any other elements you like to tag, resize if needed and add drop shadows.

13. Crop and resize tag to your liking (if you prefer a smaller tag).

14. Add your name at the bottom of tag, I used Rage Italic font at 85 pixels. apply drop shadow.

15. Add in any artist, copyright, & license info and voila! Your tag is done.

Do It

This tut is written for those with a basic knowledge of psp. I use psp 10.

Supplies needed:
Mask of choice. I used WSL_Mask81 from weescotslass.
Template: LC temp 1 made by me :) HERE.
Tube of choice. I used the artwork of Psycho Jim which you can get a license for here: MtA
Scrap kit of choice. I used Breast Cancer Awareness from Gothic Inspirations.
----------------------
Let's get started :)
1. Gather your supplies and open your psp. Open template and copy as a new image (shift/D). Delete copyright layer.

2. Take paper of choice (I used paper 7), paste as a new layer.

3. Create new mask layer, make sure 'Invert mask data' is not checked if you use the same mask as me. Merge layer group.

4. Use your magic wand select inside thin rec bottom. Take a paper and paste it as a new layer above the selected layer. (I used paper 10) Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D). Merge down and give drop shadow. Repeat this step with thin rec top, using same paper.

5. Use your magic wand select inside the lg rec layer. Take another paper and paste it as a new layer above the selected layer. (I used paper 3) Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D).

6. Use your magic wand select inside the lg rec layer again. Take the Tag Back Tulles, re size to 60%. and paste as a new layer above the paper layer. Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D). Give a drop shadow. Duplicate layer then mirror.

7. Paste Tullip as layer above Tulles. Resize to 40%, position to the right inside frame.Give drop shadow, duplicate layer then mirror.

8. Use your magic wand to select the lg frame. Take another paper and paste it as a new layer above the selected layer. (I used paper 6) Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D). Merge paper layer down and give drop shadow.

9. Using magic wand tool select inside sm rec. Take a paper and paste it as a new layer above the selected layer. (I used paper 4) Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D).

10. Using magic wand tool select sm frame. Take a paper and paste it as a new layer above the selected layer. (I used paper 6) Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D). Merge layer down and give a drop shadow.

11. Paste Tears element as layer below sm frame. Resize to 30%, position at top of frame and give drop shadow.

12. Paste your tube as a new layer above sm frame. Re size and position to your liking. Apply drop shadow to your tube.

13. Paste DiamondBling element above sheer strips layer, resize to 50% and position to the left side. Use your eraser tool to erase a few of the diamonds which over lap the tulips fully.

14. Paste BCA Ribbon as layer above sm frame, resize to your liking. Position at top right corner of sm frame. Give drop shadow. Duplicate layer and position to the top left side of sm frame. Give drop shadow.

15. Add any word art or other elements you want to your tag. Resize and position to your liking. Remember to drop shadow :)

16. Crop and resize tag to your liking (if you prefer a smaller tag like me).

17. Add your name at the bottom of tag, I used SassyFrass font at 120 pixels. apply drop shadow.

18. Add in any artist, copyright, & license info and voila! Your tag is done :)

Love Bites

This tut is written for those with a basic knowledge of psp. I use psp 10.

Supplies needed:
Mask of choice. I used WSL_Mask81 from weescotslass .

Tube of choice. I used the artwork of Anthony Guerra which can be purchased here: CILM

Scrap kit of choice. I used Vampire Lust from Gemini Creationz.
----------------------

Let's get started :)
1. Gather your supplies and open your psp. Open a new file size 600 x 600 pixels. Flood fill with white. Take paper of choice (I used paper 5), paste as a new layer.

2. Create new mask layer, make sure 'Invert mask data' is not checked if you use the same mask as me. Merge layer group.

3. Paste frame as new layer. (I used frame 2) free rotate right 90 and resize 80%. Using your magic wand tool, select inside open area the frame.

4. Take another paper and paste it as a new layer below the frame. (I used paper 6) Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D).

5. Paste doodle above mask layer, resize 90%.

6. Paste sequins below frame, free rotate - right 90. Position slighty to the right so a few sequins show from beneath frame. Duplicate layer and move new layer to the left so a few sequins show on left side of frame.

7. Paste Blood above frame, position near bottom right of frame. Go to layer properties - opacity 80. Duplicate layer, flip and position at top left of frame.

8. Paste mesh-heart above frame, position along left side of frame at bottom.

9. Paste pin above frame - position heart part of pin at top of frame, toward the left side. Give drop shadow. Using eraser tool, erase a little of the stem of the pin to make it look as if it's tacked behind frame.

10. Paste bow 4 above frame. Position to the top right corner of frame, resize to your liking. give a drop shadow.

11. Paste tube below frame layer, position and crop to your liking. Give a drop shadow.

12. Add any word art or other elements you want to your tag. Resize and position to your liking. Remember to drop shadow :)

13. Crop and resize tag to your liking (if you prefer a smaller tag).

14. Add your name at the bottom of tag, I used Amienne font at 90 pixels. apply drop shadow.

15. Add in any artist, copyright, & license info and voila! Your tag is done :)

Naughty Girl

This tut is written for those with a basic knowledge of psp. I use psp 10.

Supplies needed:
Tube of choice. I used the artwork of Jose Cano which can be purchased here: MPT

Scrap kit of choice. I used So Hot from Cora's Creations.
----------------------

Let's get started :)
1. Gather your supplies and open your psp. Open a new file size 600 x 600 pixels. Flood fill with white. Take paper of choice (I used paper 7), paste as a new layer.

2. Go to Image - Picture Frame - Edge Brush 05. Make sure Frame Canvas and Frame inside if the image are checked.

3. Paste frame 5 above the picture frame layer. Using magic wand tool, select inside frame. Go to Selections - Modify - Expand - 5.

4. Paste another paper (I used paper 8) below frame 5. Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D).

5. Paste swirl 1 element above frame, resize to your liking and position to the top of the frame. give drop shadow.

6. Paste your tube above swirl 1, resize it to your liking and give a drop shadow.

7. Paste ribbon 3 above tube. Resize to your liking, position near botton of inner rectangle on frame. give drop shadow.

8. Paste word art 3 above ribbon 3, position over ribbon as if ribbon is underlining the word. Give a drop shadow.

9. Take flower 2 element - paste as a new layer above the frame. re size to your liking. Position in middle left side of frame. Give a drop shadow.

10. Take flair 1, paste as layer above the frame. Resize to your liking, position at top left of frame. give a drop shadow.

11. Paste cherries above flair layer, resize to your liking, position at bottom of flair button. Give a drop shadow.

12. Paste bow 1 above cherries, resize to your liking. Position over stem of cherries. give drop shadow.

13. Add any other elements you like to tag, resize if needed and add drop shadows.

14. Crop and resize tag to your liking (if you prefer a smaller tag).

15. Add your name at the bottom of tag, I used Amienne font at 125 pixels. apply drop shadow.

16. Add in any artist, copyright, & license info and voila! Your tag is done

Rock Love

This tut is written for those with a basic knowledge of psp. I use psp 10.

Supplies needed:
2 Masks of choice. I used WSL_Mask81 and WSL_Mask52 from weescotslass.

Tube of choice. I used the artwork of Jose Cano which can be purchased here: MPT

Scrap kit of choice. I used Flutterby Love from Grunge & Glitter. Available for purchase here: Flutterby
----------------------

Let's get started :)
1. Gather your supplies and open your psp. Open a new file size 600 x 600 pixels. Flood fill with white. Take paper of choice (I used paper 33), paste as a new layer.

2. Create new mask layer using mask81 make sure 'Invert mask data' is not checked. Merge layer group.

3. Take another paper and past above first mask layer. (I used paper 11).

4. Create new mask layer using mask52 make sure 'Invert mask data' is not checked. Merge layer group.

5. Paste frame 10 above the mask layer, Resize 80%. Using your magic wand tool select inside frame. Go to Selections - Modify - Expand - 5.

6. Paste another paper above secind mask layer and below frame. (I used paper 17) Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D).

7. Go to your frame layer again. Using your magic wand tool, select inside frame. Go to selections - modify - expand - 5.

8. Paste chrome doodle 3 above paper and below frame layer. Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D).

9. Paste flower 8 above frame. Resize to 35 % and give drop shadow.

10. Paste flower 7 above flower 8. Resize to 30 % and give drop shadow. Position over flower 7 so that some of flower 7 shows. Give drop shadow. Merge layer down. Duplicate layer then mirror.

11. Paste glitter trail 2 above second mask layer. Resize to your liking and position so a bit of the glitter and hearts shows from beneath the frame.

12. Paste your tube below frame, resize it to your liking and give a drop shadow.

13. Go to your frame layer again. Using your magic wand tool, select inside frame. Go to selections - modify - expand - 5.

14. Go back to tube layer - Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D).

15. Add any other elements you like to tag, resize if needed and add drop shadows.

16. Crop and resize tag to your liking (if you prefer a smaller tag).

17. Add your name at the bottom of tag, I used Balzano font at 100 pixels. apply drop shadow.

18. Add in any artist, copyright, & license info and voila! Your tag is done.

Witchy

This tut is written for those with a basic knowledge of psp. I use psp 10.

Supplies needed:
Mask of choice. I used WSL_Mask245 from weescotslass.

Tube of choice. I used the artwork of Elias Chatzoudis which can be purchased here: MPT

Scrap kit of choice. I used Frank~N~Stuff from Gemini Creationz.
----------------------

Let's get started :)
1. Gather your supplies and open your psp. Open a new file size 600 x 600 pixels. Flood fill with white. Take paper of choice (I used paper 6), paste as a new layer.

2. Create new mask layer, make sure 'Invert mask data' is not checked if you use the same mask as me. Merge layer group.

3. Paste frame 2 above the mask layer, position to the upper right side of tag. Using magic wand tool select inside frame. Go to Selections - Modify - expand - 5.

4. Paste another paper above mask layer and below frame. (I used paper 11) Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D).

5. Go to your frame layer again. Using your magic wand tool, select inside frame. Go to selections - modify - expand - 5.

6. Paste web element above paper and below frame layer. Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D).

7. Paste tree element above frame. Resize to your liking and give drop shadow.

8. Using your preset shape tool, draw two rectangles. The first toward the bottom of your tag, the second will be smaller and positioned to the upper left of tag. Move second smaller rectangle below your frame.

9. Using your magic wand select inside one of the rectangles. Paste a paper as layer above rectangle. Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D).

10. Repeat step 9 for the other rectangle, using a different paper.

11. Paste your tube above larger rectangle, resize it to your liking and position toward the bottom of your tag in front of rectangle. give a drop shadow.

12. Take the starcluter element - paste as a new layer above the mask. re size to your liking.

13. Add any other elements you like to tag, resize if needed and add drop shadows.

14. Crop and resize tag to your liking (if you prefer a smaller tag).

15. Add your name at the bottom of tag, I used Balzano font at 100 pixels. apply drop shadow.

16. Add in any artist, copyright, & license info and voila! Your tag is done.

Purr

This tut is written for those with a basic knowledge of psp. I use psp 10.

Supplies needed:
Mask of choice. I used WSL_Mask81 from weescotslass.

Tube of choice. I used the artwork of Marco Guaglione which can be purchased here: MPT

Scrap kit of choice. I used Mz Kitten from Cora's Creations.
----------------------

Let's get started :)
1. Gather your supplies and open your psp. Open a new file size 600 x 600 pixels. Flood fill with white. Take paper of choice (I used paper 1), paste as a new layer.

2. Create new mask layer, make sure 'Invert mask data' is not checked if you use the same mask as me. Merge layer group. Optional step: Duplicate layer and merge duplicated layer with original mask layer. This makes the mask darker.

3. Paste frame 11 above the mask layer, free rotate right 90. Resize to 80%. Using your selection tool - rectangle, draw a rectangle inside outer edges offrame .

4. Paste another paper (I used paper 4) above mask layer and below frame. Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D).

5. Go to your frame layer again. Using your magic wand tool, select inside lower left rectangle of the frame. Go to selections - modify - expand - 5.

6. Paste another paper below frame layer. (I used paper 2) Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D). Repeat this step for upper right rectangle of frame.

7. Paste frame 6 above frame 11. Resize to 90%, give drop shadow.

8. Paste your tube above your frame, resize it to your liking and position to the right side of frame. give a drop shadow.

9. Take the metal flowers element - paste as a new layer above the tube. re size to your liking. Position at bottom, right corner of frame. Give a drop shadow.

10. Take milk jar, resize to your liking, paste as layer above the tube. position at bottom left of frame. give a drop shadow.

11. Paste fish bones below milk jug but above frame layer, resize to your liking, position behind milk jug at lower left corner of frame. Give a drop shadow.

12. Paste worart 1 (purr) above frame 11, resize to your liking. Position to upper left of frame. give drop shadow.

13. Add any other elements you like to tag, resize if needed and add drop shadows.

14. Crop and resize tag to your liking (if you prefer a smaller tag).

15. Add your name at the bottom of tag, I used Segoe Print font at 72 pixels. apply drop shadow.

16. Add in any artist, copyright, & license info and voila! Your tag is done