Monday, November 30, 2009

Darkest


This tut is written for those with a basic knowledge of psp. I use psp 10.

Supplies needed:
Mask: WSL_Mask83 from weescotslass .
Tube of choice. I used the artwork of Jeffery Scott which can be purchased here: MPT

Scrap kit of choice. I used Delusional from Gothic Inspirations.
----------------------


Let's get started :)
1. Gather your supplies and open your psp. Open a new file size 500 x 550 pixels. Flood fill with white. Take paper 20, paste as a new layer.

2. Create new mask layer, make sure 'Invert mask data' is not checked if you use the same mask as me. Merge layer group.

3. Paste frame 3 as new layer above mask layer. Using magic wand tool, select inside frame.

4. Paste paper 4 below frame 3, Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D).

5. Paste mesh element as new layer above frame 3. Resize to 75% and position over frame to the left side. Give drop shadow

6. Take GlitterSquareSpillWSpiders and paste it as a new layer below paper 4. Resize to your liking and position so a little sticks out on the upper left corner and lower right corner of frame.

7. Take WireMesh element and paste as new layer above glitter spill, position to the upper right so a little of the mesh sticks out from under the frame. DUplicate layer, mirror and flip.

8. Paste Bead element above frame, resize to 60% and position it in middle of frame. Give a drop shadow.

9. Take Barbwire element and paste as a new layer above the bead element. re size to 83%. Give drop shadow.

10. Take RibbonWCharm, resize 40%, paste as layer above the Barwire. Position at top of frame nearly to the left corner. Give a drop shadow.

11.Paste BowWStaple element above ribbon, resize to 40%. Position over ribbon so it appears they are stapled together to the frame. Give drop shadow.

12. Paste tube above Barbwire, position to the right side of the frame. Give drop shadow. Duplicate layer and mirror. Move duplicated layer beneath frame. Go to layers - properties and change opacity to 40.

13, Paste Thorns as new layer above tube, resize to 65%. Position toward bottom of frame. Give drop shadow.

14. Paste RustyBucket as new layer above Thorns. Resize to 25%, position to lower left corner in front of frame. Give drop shadow.

15. Paste Skull element above Thorns, resize to 25%. Position to the lower right corner in front of frame. Give drop shadow.

16. OPTIONAL: I added in CrumpledPaper element at bottom of frame, to cover part of the tube. The Used the Stitched element to make it appear as if sewn into frame.

17. Crop and resize tag to your liking (if you prefer a smaller tag).

18. Add your name at the bottom of tag, I used StraightJacketBB font at 80 pixels. apply drop shadow.

19. Add in any artist, copyright, & license info and voila! Your tag is done.

Saturday, November 21, 2009

HH2009


This tut is written for those with a basic knowledge of psp. I use psp 10.

Supplies needed:

Mask of choice. I used GabeeChristmas 5.

Tube of choice. I used the artwork of Denis Rino which can be purchased here: MPT

Scrap kit: Berry Xmas from WackyWinnie Designz.
----------------------

Let's get started :)
1. Gather your supplies and open your psp. Open mask in psp and then open a new file size 600 x 600 pixels. Flood fill with white. Take paper 18, paste as a new layer.

2. Open Go to Layers - New Mask Layer - From Image - select mask. Make sure invert mask data is checked (if using same mask as me).

3. Using magic wand tool, select inside circle of mask layer. Take paper 16 and paste into selection (ctrl/shift/L). Select none (ctrl/D). Merge layer group.

4. Paste FFrame2 above the mask layer. Resize to 60% and Free Rotate - Right 90. Using magic wand tool, select inside frame. Go to Selections - Modify - Expand - 5.

5. Paste paper15 below frame. Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D). Give frame a drop shadow.

6. Paste Garland element above paper15 and below frame. Resize to 65%. Position in middle of frame. Give drop shadow.

7. Paste your tube above frame, resize and position to your liking. Give drop shadow. **Optional Step: Depending on your tube you may wish to use your eraser tool to 'shave off' some edges that overhang frame.

8. Paste Sunflower1 above frame layer, resize to 30%. Position to the upper left corner of frame. Give drop shadow. Duplicate layer and position second flower at lower right corner of frame.

9. Paste CBall1 above frame, resize to 30% and position to the upper right corner of frame so loop is in center of flower. Give drop shadow.

10. Paste Candle2 element above tube. Resize to 40%, position to your liking, near lower left corner of frame. Give drop shadow.

11. Add any other elements you'd like to tag, resize if needed and add drop shadows.

12. Crop and resize tag to your liking (if you prefer a smaller tag).

13. Add your name at the bottom of tag, I used BixAntiqueScriptHmkBold font at 80 pixels. apply drop shadow.

14. Add in any artist, copyright, & license info and voila! Your tag is done.

Waiting


This tut is written for those with a basic knowledge of psp. I use psp 10.

Supplies needed:
Mask: WSL_Mask167 from weescotslass .

Tube of choice. I used the artwork of Ismael Rac which can be purchased here: AMI

Scrap kit: Holiday Shimmer from Gemini Creationz.
----------------------

Let's get started :)
1. Gather your supplies and open your psp. Open a new file size 600 x 600 pixels. Flood fill with white. Take paper 2, paste as a new layer.

2. Create new mask layer, make sure 'Invert mask data' is not checked. Merge layer group.

3. Paste frame04 as new layer. Using your magic wand tool, select inside open area the frame.

4. Take paper08 and paste it into selected area (ctrl/shift/L), then select none (ctrl/D). Give layer a drop shadow.

5. Paste frame01 below frame04. Free Rotate - Right 90. Give drop shadow.

6. Paste frame03 below frame01. Position slighty to the right so part of the circle shows beneath the other frames. Give frame03 a drop shadow.

7. Paste sparkles above mask layer, position near bottom right of frame01. Duplicate layer, flip and mirror.

8. Paste star cluster above sparkles, position along left corner of frame at bottom. Duplicate layer, then flip and mirror.

9. Paste stocking above frame04, resize stocking to 30%. Position at top of frame, toward the left corner. Give drop shadow.

10. Paste ornament01 above stocking, resize to 30%. Position to the top right corner of frame. Give a drop shadow.

11. Paste tube above other layers, position to your liking. Give a drop shadow.

12. Add any word art or other elements you want to your tag. Resize and position to your liking. Remember to drop shadow :)

13. Resize tag to your liking (if you prefer a smaller tag).

14. Add your name at the bottom of tag, I used Base:Christmas font at 90 pixels.

15. Add in any artist, copyright, & license info and voila! Your tag is done :)

Tuesday, November 17, 2009

Cool Santa

This tut is written for those with a basic knowledge of psp. I use psp 10.

Supplies needed:

Mask: WSL_Mask83 from weescotslass.

Tube of choice. I used the artwork of Jeff Wilkie which can be purchased here: MPT

Scrap kit: Mele Kalikimaka from Cora's Creations.
----------------------

Let's get started :)
1. Gather your supplies and open your psp. Open mask in psp and then open a new file size 600 x 600 pixels. Flood fill with white. Take paper 10, paste as a new layer.

2. Open Go to Layers - New Mask Layer - From Image - select mask. Make sure invert mask data is not checked. Merge group.

3. Paste frame 01 above the mask layer. Resize to 80% position slightly to the right side. Using magic wand tool, select inside frame. Go to Selections - Modify - Expand - 5.

4. Paste paper 4 below frame. Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D). Give frame a drop shadow.

5. Paste glitter swirl element above frame 01. Position to your liking.

6. Paste frame 02 above the mask layer. Position slightly to the left over frame 01. Using magic wand tool, select inside frame 02. Go to Selections - Modify - Expand - 5

7. Paste paper 8 below frame. Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D).

8. Go back to frame 02, Using magic wand tool, select inside frame 02. Go to Selections - Modify - Expand - 5.

9. Paste your tube above paper 1, resize and position to your liking within selected area of frame. Invert selection (ctrl/shift/I) then hit delete, and select none (ctrl/D). Give tube and frame a drop shadow.

10. Paste sun element above tube. Resize to 25%, position to your liking, near top inside frame. Give light yellow drop shadow.

11. Paste life-saver above frame 02, resize to your liking and position so 'peg' is to the upper right corner of frame.

12. Paste anchor above frame 02. Position to the lower right side of frame. Give a drop shadow.

13. Paste as flower 01 above the frame. Resize to 25%, position at lower left corner of frame. give a drop shadow.

14. Paste netting above flower layer, position at left side of frame as if draped over or hanging from it. Give a very slight drop shadow.

15. Paste palm-tree above netting, resize to 90%. Position on left side of frame. give drop shadow.

16. Paste sand above palm tree, postition to the bottom of tag so a little of the sand overlaps a little on the frame and elements in the lower part of tag.

17. Add any other elements you'd like to tag, resize if needed and add drop shadows.

18. Crop and resize tag to your liking (if you prefer a smaller tag).

19. Add your name at the bottom of tag, I used sabrina font at 72 pixels. apply drop shadow.

20. Add in any artist, copyright, & license info and voila! Your tag is done.